T接端子JXT1 JXT1-25 5P
T接端子JXT1 JXT1-25 5P
產品價格:¥15(人民幣)
  • 規格:95-25
  • 發貨地:深圳
  • 品牌:
  • 最小起訂量:1個
  • 免費會員
    會員級別:試用會員
    認證類型:企業認證
    企業證件:通過認證

    商鋪名稱:優聯電纜熔接技術(深圳)有限公司

    聯系人:何經理(先生)

    聯系手機:

    固定電話:

    企業郵箱:3326480758@qq.com

    聯系地址:深圳市寶安區西鄉寶民二路728號

    郵編:5210800

    聯系我時,請說是在線纜網上看到的,謝謝!

    商品詳情
      XT1系列T接端子及電纜T接箱通常用于建筑、工業電氣設備中作主電纜(干線)不能切斷時的“T”型支線連接用。該產品由絕緣基座、接線框、防護罩三部分組成,接線框由導線夾、螺釘、螺母和支承框五種零件組成,導線夾與導線接觸面呈包容形的犬牙交錯結構,具有接觸面大、壓接可靠的特點,通過不同形狀的導線夾的相互組合,可形成雙層接線,下層接入主干線,上層接入分支線,形成干線不斷的“T”型連接。
      主要適合于建筑電氣、低壓電控配電、自動化成套裝置等領域中作各類主干線不能切斷的分支連接之用。同時也可作大截面電纜的線端連接之用。
      JXT1 series T terminal and the cable T connection box are usually used in the "T" - shaped connection when the main cable (main line) can not be cut off in the construction and industrial electrical equipment. It is mainly suitable for building electrical, low-voltage electric control distribution, automatic complete set of equipment and other fields can not be cut off of the branches of the branch. At the same time, it can also be used as the wire end connection of large section cable.
      實現電纜不切斷時的干線分線,組態靈活
      實現銅或鋁導體的可靠連接,實現銅——鋁過渡
      所有電性能指標均符合IEC 國際標準,具導電性好、電阻損耗低、電壓降小等優點,接觸點壓降僅為1.98mV,是國際標準的2/3
      較強耐熱性和抗沖擊能力,可承受120A/mm2 的短路強度試驗,絕緣基座采用不燃燒材料制作、耐老化性能優良
      安裝方便,節省施工工時,不用線鼻子(端頭),實現裸導體連接,深受施工隊伍歡迎
      與插接式母線槽及分支電纜相比,節省50%-70%的工程費用
      型號Specification JXT1-25/5P
      主線截面Main line 6-25mm2
      支線截面Branch line 4-16mm2
      壓線螺絲Screw M8
      力矩Torque 18N·m
      剝線長度Strip length 23mm
      外觀尺寸Dimension 長135寬60高78mm
      用六角扳手?jǐn)Q開螺絲取出導體
      Unscrew the screw with a six - corner wrench
      take out the conductor
      將主線與支線剝開適用長度
      Peel off the length of the main line
      and the branch line
      將主線、導體、支線、螺栓、螺母按順序放入支架,并擰緊螺母
      The main line, the conductor, the branch, the bolt,
      the nut put the bracket in order and tighten the nut
      蓋上防護罩并壓緊完成安裝
      Cover with a protective cover and press tight
      to complete installation
    在線詢盤/留言
  • 0571-87774297