保定手動堆高車專賣
保定手動堆高車專賣
產品價格:¥1(人民幣)
  • 規格:6656
  • 發貨地:石家莊
  • 品牌:
  • 最小起訂量:1臺
  • 免費會員
    會員級別:試用會員
    認證類型:企業認證
    企業證件:通過認證

    商鋪名稱:河北駿豪機械設備有限責任公司

    聯系人:張帥(先生)

    聯系手機:

    固定電話:

    企業郵箱:2067778308@qq.com

    聯系地址:河北省石家莊市長安區勝利北街219號花中錦五金機電市場274-275號

    郵編:50000

    聯系我時,請說是在線纜網上看到的,謝謝!

    商品詳情

      河北駿豪機械設備有限責任公司

      聯系人:張經理13933002678

      堆高車驅動輪速度明顯降低或驅動電機嚴重過載:原因:電池電壓太低或樁頭接觸電阻太大;電機換向器片間積碳引起片間短路;電機制動器調整不當而使電機帶制動運行;驅動頭齒輪箱及軸承缺少潤滑或底座卡阻;電機電樞短路。解決方法:檢查堆高車負載時電池端電壓或清洗樁頭;清理?yè)Q向器;調整制動器間隙;檢查清洗并重新加注潤滑油,清除卡阻現象;更換新電機。
      Forklift truck driving wheel speed decrease or drive motor overload causes: the battery voltage is too low or the pile head contact resistance is too large; the motor commutation carbon caused by short-circuit between plates; improper adjustment of the motor brake motor with brake operation; driving head gear box and the bearing base resistance or lack of lubrication card; motor armature short-circuit. Solution: check the battery load at the end of the stack truck or clean the pile head; clean the commutator; adjust the brake clearance; check, clean and refill the oil, remove the obstruction; replace the new motor.

      青春,如三月的春風,我們沐浴在春風里。三月的春風,是我們的朋友,是我們的同窗,是陪伴我

      們成長的玩伴。因?yàn)橛辛舜猴L(fēng),我們感受到友誼的溫暖;因?yàn)橛辛舜猴L(fēng),我們不再寂寞;因?yàn)橛辛舜猴L(fēng)

      ,我們總在需要幫助的時候,有他們伸出援助之手。春風,是那樣感情豐富,溫婉細膩。在春風里,我

      們跳著,唱著,歡呼著,只因?yàn)檫@如春風的情誼。

      堆高車起重?zé)o力或不能起重原因:齒輪泵與泵提磨損過度;換向閥內的溢流閥高壓不當;油壓管路漏油;液壓油油溫過度;門架滑架存在卡阻現象;油泵電機轉速過低。解決方法:更換磨損或齒輪泵;重新調整;檢查并修復;更換不合格的液壓油并檢查油溫度升高的原因;檢查并調整;檢查電機并排除故障。
      Stacker crane lifting to reason: the gear pump and the pump provided excessive wear; high pressure solenoid valve relief valve in hydraulic pipeline improper; leakage; excessive oil temperature; the door frame carriage are blocked; the pump motor speed is too low. Solution: replace wear or gear pumps; readjust; check and repair; replace faulty hydraulic oil and check the cause of elevated oil temperature; check and adjust; check motor and troubleshoot.

       

    在線詢盤/留言
  • 0571-87774297