S120控制單元6SL3040-0JA00-0AA0
S120控制單元6SL3040-0JA00-0AA0
產品價格：￥電議（人民幣）
  • 規格：6SL3040-0JA00-0AA0
  • 發貨地：上海
  • 品牌：
  • 最小起訂量：1件
    • 誠信商家
    會員級別：鉆石會員
    認證類型：企業認證
    企業證件：通過認證

    商鋪名稱：上海斌勤電氣技術有限公司

    聯系人：康奎（先生）

    聯系手機：

    固定電話：

    企業郵箱：192061030@qq.com

    聯系地址：上海市松江區三新北路1800弄（松江電子商務園區）

    郵編：201501

    聯系我時，請說是在線纜網上看到的，謝謝！

    商品詳情

      S120控制單元6SL3040-0JA00-0AA0 


      上海斌勤電氣技術有限公司專業從事西門子這個品牌已經有10年。
      在松江工業園區有一定的名聲   
      不要問我有沒有  西門子常規的都現貨  支持上門提貨

      有需要的新老顧客歡迎上門提貨談生意（老顧客注意公司地址更改）
      上海斌勤電氣技術有限公司(西門子合作伙伴）
      聯系人 ：康 奎(業務經理）發布(聯系我有優惠福利哦）
      地   址：上海市松江區三新北路1800弄（松江商務電子園區）24號樓5005室.

      CU305 Control Unit

      跳轉到

      概述

      CU305 PN Control Unit

      The CU305 Control Unit for the communication and open-loop/closed-loop control functions of a SINAMICS S110 is combined with the PM240?2 Power Module in blocksize format (usable as of firmware V4.4 SP3) to create a powerful single drive.

      設計

      The CU305 Control Unit features the following connections and interfaces as standard:

      • Fieldbus interface
        • CU305 PN: 1 PROFINET interface with 2 ports (RJ45 sockets) with PROFIdrive V4 profile
        • CU305 DP: 1 PROFIBUS interface with PROFIdrive V4 profile
      • 1 DRIVE-CLiQ socket, used solely to connect a DRIVE-CLiQ motor or a Sensor Module
      • 1 onboard encoder evaluation for evaluating the following encoder signals
        • Incremental encoder TTL/HTL
        • SSI encoder without incremental signals
      • 1 PE/protective conductor connection
      • 1 connection for the electronics power supply via the 24 V DC power supply connector
      • 1 temperature sensor input (KTY84?130 or PTC)
      • 3 parameterizable, fail-safe digital inputs (isolated), or alternatively 6 parameterizable digital inputs (isolated)
      • 5 parameterizable digital inputs (isolated)
      • 1 parameterizable, fail-safe digital output (isolated), or alternatively 1 digital output (isolated)
      • 4 parameterizable bidirectional digital inputs/outputs
      • 1 analog input ± 10 V, resolution 12 bit + sign
      • 1 serial RS232 interface
      • 1 slot for the memory card on which the firmware, parameters and licenses can be stored
      • 1 PM-IF interface for communication with the PM240?2 Power Modules in blocksize format (usable as of firmware V4.4 SP3)
      • 2 test sockets and one reference ground for commissioning support
      • 1 interface to the BOP20 Basic Operator Panel

      集成

      The CU305 Control Unit controls the PM240 2 Power Module in blocksize format (usable as of firmware V4.4 SP3) via the PM-IF interface.

      A BOP20 Basic Operator Panel can also be snapped directly onto the CU305 for diagnostic purposes.

      DRIVE-CLiQ motors can be connected to the integrated DRIVE-CLiQ socket as well as Sensor Modules (SMC) to permit the operation of motors without a DRIVE-CLiQ interface.

      The status of the CU305 is indicated via multi-color LEDs.

      The CU305 can be operated optionally with memory card. The firmware and project data are stored on the memory card pluggable from below, so that the CU305 can be replaced without the support of software tools. This memory card can also be used to perform standard commissioning on multiple drives of identical type. The card is available as an empty memory card or containing the latest drive firmware version. The card also contains the safety license for the Extended Safety Functions. To use these Extended Safety Functions, a memory card containing the safety license must be permanently inserted.

      The CU305 and other connected components are commissioned and diagnosed with the STARTER commissioning tool.

      Connection example of CU305 Control Unit

      技術規范

      CU305 PN / CU305 DP Control Units

      PROFINET: 6SL3040-0JA01-0AA0

      PROFIBUS: 6SL3040-0JA00-0AA0

       

      Current requirement

      At 24 V DC, max.
      without taking account of digital outputs and DRIVE-CLiQ supply

      0.8 A for CU305 incl. 350 mA for HTL encoder + 0.5 A for PM240?2 Power Module

      Conductor cross-section, max.

      2.5 mm2

      Fuse protection, max.

      20 A

      Digital inputs

      in accordance with IEC 61131?2 Type 1

      3 isolated fail-safe inputs

      5 isolated digital inputs

      • Voltage

      -3 ... +30 V

      • Low level (an open digital input is interpreted as "low")

      -3 ... +5 V

      • High level

      15 ... 30 V

      • Current consumption at 24 V DC, typ.

      6 mA

      • Delay time of digital inputs 1), approx.

       

      • L → H

      15 μs

      • H → L

      55 μs

      • Delay time of high-speed digital inputs 1), approx. 
        (high-speed digital inputs can be used for position detection)

       

      • L → H

      5 μs

      • H → L

      5 μs

      • Conductor cross-section, max.

      1.5 mm2

      Digital outputs

      (continuously short-circuit-proof)

      1 fail-safe digital output

      4 bidirectional digital inputs/digital outputs, not isolated

      • Voltage

      24 V DC

      • Load current per digital output 2), max.

      100 mA

      • Delay time 1), approx.

      150 μs

      • Conductor cross-section, max.

      1.5 mm2

      Analog input

      -10 ... +10 V
      Resolution 12 bits + sign

      • Internal resistance

      15 kΩ

      Encoder evaluation

      • Incremental encoder TTL/HTL
      • SSI encoder without incremental signals
      • Encoder supply

      24 V DC/0.35 A or 5 V DC/0.35 A

      • Input current range TTL/HTL

      2 ... 10 mA (typ. 5 mA)

      • Encoder frequency, max.

      500 kHz

      • SSI baud rate

      100 ... 250 kBaud
      depending on cable length

      • Resolution absolute position SSI

      30 bit

      • Cable length, max.

       

      • TTL encoder

      100 m (328 ft)

      (only bipolar signals permitted) 3)

      • HTL encoder

      100 m (328 ft) for unipolar signals

      300 m (984 ft) for bipolar signals 3)

      • SSI encoder

      100 m (328 ft)

      Power loss

      <20 W

      PE connection

      M5 screw

      Dimensions

       

      • Width

      73 mm (2.87 in)

      • Height

       

      • CU305 PN

      195 mm (7.68 in)

      • CU305 DP

      183.2 mm (7.21 in)

      • Depth

       

      • CU305 PN

      71 mm (2.80 in)

      • CU305 DP

      55 mm (2.17 in)

      Weight, approx.

      0.95 kg (2.09 lb)

      Certificate of suitability

      cULus


      1)The specified delay times refer to the hardware. The actual reaction time depends on the time slice in which the digital input or output is processed.

      2) In order to use the digital outputs, an external 24 V power supply must be connected to terminal X124.

      3) Signal cables twisted in pairs and shielded.



      S120控制單元6SL3040-0JA00-0AA0 

    在線詢盤/留言
    • 0571-87774297