MA7001 is a three-terminal Hall Effect sensor device with an output driver, mainly designed

for battery–operation, hand-held equipment (such as Cellular and Cordless Phone, PDA).

       The output is switch with either north or South Pole of sufficient strength will turn the output

on (low). The output will be turned off (high) under no magnetic field. While the magnetic flux

density (B) is larger than operate point (Bop), the output will be turned on (low); the output is

latched until B is lower than release point (Brp) and then turned off (high). 

-        Micro Power Operation for Battery Applications

-        1.65V to 5.5V battery operation

-        Chopper Stabilized Technology

-        Operation with North or South Pole

-        High sensitivity and high stability of the magnetic switching points

-        Packages : SOT23-3L /F,SIP-3L(TO-92S) , DFN1.6x1.6-6L ,SOT553.

插件封裝如下圖：

深圳市七悅科技有限公司，長期提供霍爾元件(4條腿)，霍爾芯片，霍爾開關，磁控開關，電機霍爾，全極霍爾，單極霍爾，雙極鎖存霍爾，線性霍爾。

歡迎來電咨詢?cè)敿?xì)功能、參數及代替型號選型，隨時提供技術支持！